Lab 8
ENGR 338
James Ferguson
Introduction
The goal of this lab is to create a 2x8 bit to 8-bit mux and an 8-bit full adder.
Methods
The following shows the layout and schematic of a 1x2 to 1 mux.
The following shows the layout and schematic of a 8x2 to 8 mux.
The following shows the layout and schematic of a full adder.
The following shows the layout and schematic of an 8-bit full adder.
Results
The 1x2 to 1 mux performed as expected.
The full adder performed as expected.
Discussion
These components will be useful in developing more complex circuits such as an ALU.