| Rule Violations |
Count |
| Clearance Constraint (Gap=10mil) (All),(All) |
0 |
| Short-Circuit Constraint (Allowed=No) (All),(All) |
0 |
| Un-Routed Net Constraint ( (All) ) |
0 |
| Modified Polygon (Allow modified: No), (Allow shelved: No) |
0 |
| Width Constraint (Min=10mil) (Max=40mil) (Preferred=40mil) (All) |
0 |
| Power Plane Connect Rule(Relief Connect )(Expansion=20mil) (Conductor Width=10mil) (Air Gap=10mil) (Entries=4) (All) |
0 |
| Hole Size Constraint (Min=1mil) (Max=100mil) (Disabled)(All) |
0 |
| Hole To Hole Clearance (Gap=10mil) (All),(All) |
0 |
| Minimum Solder Mask Sliver (Gap=10mil) (Disabled)(All),(All) |
0 |
| Silk To Solder Mask (Clearance=10mil) (Disabled)(IsPad),(All) |
0 |
| Silk to Silk (Clearance=10mil) (Disabled)(All),(All) |
0 |
| Net Antennae (Tolerance=0mil) (All) |
0 |
| Room Sheet1 (Bounding Region = (5mil, 5mil, 3025mil, 2200mil) (InComponentClass('Sheet1')) |
0 |
| Height Constraint (Min=0mil) (Max=1000mil) (Prefered=500mil) (All) |
0 |
| Total |
0 |
