CE
433 2023 Spring
Lab 2
Name: Anders Burdick-Levang
Email:
aaburdicklevang@fortlewis.edu
Lab #2
1.
Go through all the steps in this lab instruction, report your code,
simulation results, and the on-board verification results. (30 points)
Using the code in the tutorial, I was able to replicate the desired results of an AND gate.
The results of the symulation are presented in the following image:
Uploading the results to the basys 3 board give the following results:
2. Use the same procedure to create XOR and OR gates. Run simulations to verify the logic. (30 points)
3. Use both the volatile and nonvolatile methods (QSPI) to program your FPGA. Show videos for the demonstrations. (40 points)