CE 433 2023 spring
HW4
Name: Anders Burdick-Levang
Email:
aaburdicklevang@fortlewis.edu
HW #4
1. Repeat the simulation in Sections 1 - 3.
A.
![](4_1_a.png)
![](4_1_a_sym.png)
B.
![](4_1_b.png)
![](4_1_b_sym.png)
C.
![](4_1_c.png)
![](4_1_c_sym.png)
2. Build a debounce circuit on a breadboard using a pushbutton, a passive low-pass filter, and a schmitt trigger IC chip (74HC14, these chips are available in the SFH760 lab)
![](20240502_202759.jpg)
3. Write the testbenches and run simulations for Section 4 and Section 5.
Section 4:
![](4_3_a.png)
4. Repeat all the work in Section 8 and complete the task described in the end of Section 8.
![](4_3_a_sym.png)
Section 5:
![](4_3_b.png)
![](4_3_b_sym.png)
4. Repeat all the work in Section 8 and complete the task described in the end of Section 8.
![](4_4_a.png)
![](4_4_a_sym.png)
![](4_4_b.png)
![](4_4_b_sym.png)
![](4_4_c.png)
![](4_4_c_sym.png)
![](4_4_d.png)
![](4_4_d_sym.png)
![](4_4_e.png)