ENGR337 Lab 2020 Spring
Lab 8:Tutorial 3
Name: Ryan Ford
Email: rwford@fortlewis.edu
Introduction:
The purpose of this lab was to familiarize students with ElectricVLSI
by having them run through a series of excercises.
Materials and Methods:
The materials used in this lab included LTspice and ElectricVLSI.
Follow the instructions specified in Lab 8, tutorial 3 on yilectronics.com.
Results:
Figure 1a shows the schematic view of the inverter made in
ElectricVLSI, and figure 1b shows the inverter simulation schematic
with spice code.
Figure 1a: Schematic of inverter in Electric VLSI
Figure 1b: Spice code added to the inverter
Figure 1c shows the results from writing to the spice deck.
Figure 1c:LTSpice results from writing to the spice deck
Figure 2a shows the layout view of the inverter, and figure 2b shows the results from writing to the spice deck.
Figure 2a: Layout view of inverter
Figure 2b: Spice results from the layout view of the inverter
Discussion:
All
of the results matched the expected resuts
shown in Lab 8, tutorial 3 on ylectronics.com. The graphs in figure 1c and figure 2b match, so the results are consistent.
