ENGR337 Lab 2020 Spring
Lab 6:Tutorial 1
Name: Ryan Ford
Email: rwford@fortlewis.edu
Introduction:
The purpose of this lab was to familiarize students with ElectricVLSI
by having them run through a series of excercises, ultimately making a
voltage divider.
Materials and Methods:
The materials used in this lab included LTspice and ElectricVLSI.
Follow the instructions specified in Lab 6, tutorial 1 on yilectronics.com.
Results:
Figure 1 one shows a schematic of the voltage divider circuit, and figure 2 shows the results in LTspice.
Figure 1: Voltage divider schematic drawn in ElectricVLSI
Figure 2: LTspice results for figure 1
Figure 3 shows the layout for the voltage dvider circuit, and figure 4 shows the results of simulation in LTspice.
Figure 3: Layout for the voltage divider in ElectricVLSI
Figure 4: LTspice for the layout in figure 3
Discussion:
All of the results matched the expected resuts
shown in Lab 6, tutorial 1 on ylectronics.com. It can also be
noted that the results for Figure 2 and Figure 4 match eachother, which
is expected.
