ENGR338 Digital Electronics Laboratory
Lab 10  The Chip (2-week lab)

1. Design a padframe and place the ALU inside the chip.

Lab Tasks: (90 points)

Watch the following videos to create a 40-pin padframe for the ALU. The ESD diodes must be included in the padframe.
Video 1: Make an Nact_Pwell Diode: (PDF notes):

Video 2: Make an ESD Pad: (PDF notes):

Video 3: Make a Padframe: (PDF notes):

Lab reports grading rubric:

Tasks: 90 points.
Writing/formatting: 10 points.

---------------------------------This is the end of the lab