#include <IRremote.h>
#include <LiquidCrystal.h>
//                BS  E  D4 D5  D6 D7
LiquidCrystal lcd(7, 8, 9, 10, 11, 12);
int receiver = 5; // Signal Pin of IR receiver to Arduino Digital Pin 5
IRrecv irrecv(receiver);     // create instance of 'irrecv'
decode_results results;      // create instance of 'decode_results'
void translateIR() // takes action based on IR code received
{
  switch(results.value)
  {
  case 0xFFA25D: lcd.print("POWER         "); break;
  case 0xFFE21D: lcd.print("FUNC/STOP     "); break;
  case 0xFF629D: lcd.print("VOL+          "); break;
  case 0xFF22DD: lcd.print("FAST BACK     ");  break;
  case 0xFF02FD: lcd.print("PAUSE         ");  break;
  case 0xFFC23D: lcd.print("FAST FORWARD  ");  break;
  case 0xFFE01F: lcd.print("DOWN          ");  break;
  case 0xFFA857: lcd.print("VOL-          ");  break;
  case 0xFF906F: lcd.print("UP            ");   break;
  case 0xFF9867: lcd.print("EQ            ");  break;
  case 0xFFB04F: lcd.print("ST/REPT       ");   break;
  case 0xFF6897: lcd.print("0             ");    break;
  case 0xFF30CF: lcd.print("1             ");    break;
  case 0xFF18E7: lcd.print("2             ");    break;
  case 0xFF7A85: lcd.print("3             ");    break;
  case 0xFF10EF: lcd.print("4             ");    break;
  case 0xFF38C7: lcd.print("5             ");    break;
  case 0xFF5AA5: lcd.print("6             ");    break;
  case 0xFF42BD: lcd.print("7             ");    break;
  case 0xFF4AB5: lcd.print("8             ");    break;
  case 0xFF52AD: lcd.print("9             ");    break;
  case 0xFFFFFFFF: lcd.print("REPEAT      ");break;  
  default: 
  lcd.print("INVALID          ");
  }
  delay(500); // Do not get immediate repeat
} //END translateIR
void setup()
{
  lcd.begin(16,2);
  irrecv.enableIRIn(); // Start the receiver
}
void loop()  
{
  if (irrecv.decode(&results)) // have we received an IR signal?
  {
    lcd.setCursor(0,0);
    lcd.print(results.value);
    lcd.setCursor(0,1);
    translateIR();
    irrecv.resume(); // receive the next value
  }  
}